How to Finish Concrete
The primary purpose for finishing concrete pavements is to remove any small surface imperfections and seal the surface of the slab. Allow all of the water to disappear before you do anything else. This can take 20 minutes or 4 hours depending on the temperature, humidity and how hard the wind is blowing. After the bleed water is all gone, you can get out your steel finishing trowel and put on the final touches. How to Finish Concrete in Vancouver, BC Step 1: Pouring the Concrete. After thoroughly mixing the concrete pour it into the forms slightly overfilling them. … Step 2: Smooth the Concrete Surface. … Step 3: Use a Broom to Finish the Surface Texture of the Concrete. … Step 4: Cure the Concrete. … 4 Discussions. Use a Finishing Trowel To finish the concrete,